Externally applied systems with or without crack-bridging abilities. Sika waterproof mortars and bitumen based coatings are rigid or semi-flexible waterproofing products. They are supplied as ready to use solutions to seal against damp soil, seepage and percolating water. They must be pre-applied on suitable substrates under new structural concrete slabs and are generally post-applied externally on new walls.
They must be used in combination with appropriate joint waterproofing systems for construction and movement joints. Good external drainage with a permanent dewatering system is also necessary; normally using drainage pipes placed at or below the level of the base slabs to prevent any build-up of water pressure.
- As a waterproofing system for Grades 1 to 2
- To protect structures against percolating water
- For limited ground conditions (no settlement, less aggressive environments, low water pressure)
- Cost efficient solution (Material + Application)
- Ready to use & easy to apply
- Provide additional concrete protection
- Domestic applications
- Residential buildings
- Industrial buildings
SikaTop® Seal-107 / Sika MonoTop -160 Migrating
SikaTop® Seal-1072-component, polymer modified, rigid cementitious waterproofing mortar, internally and externally applied for full surface waterproofing and tanking.
Sika MonoTop -160 MigratingThis Crystallization Waterproofing Slurry is a one-component mortar specially designed to waterproof capillaries and pores in concrete elements and repair mortars to reduce the water ingress.
Sikalastic®-1K1-component, flexible, fibre reinforced mortar, based on cement modified with special alkali-resistent polymers. Ideal for waterproofing surfaces subject to flexural strain.
Sika® Igolflex®-201A two-part, solvent-free and fibre reinforced coating, based on a polymer-modified bitumen emulsion. Part one contains the liquid polymer modified bitumen emulsion, with the fibre reinforcement. Part two contains the reactive component for accelerated curing
- Complementary products for joint sealing and waterproofing
Sika® WaterbarInternal or external applied waterstops based on PVC, TPO or galvanised steel for construction and movement joints.
SikaSwell® Sealants and ProfilesRange of hydrophilic profiles and gun applied sealants, designed for the sealing and waterproofing of construction joints and penetrations (e.g. pipe entries).
Find out more